Skip to Content

ABLOY Critical Infrastructure helps secure bp Alternative Energy wind farms

ABLOY Critical Infrastructure helps secure bp Alternative Energy wind farms

IRVING, Texas—ABLOY USA Critical Infrastructure is helping to secure bp Alternative Energy wind farms. As one of the leaders in the clean energy industry, bp Alternative Energy has utilized about 1,200 of ABLOY’s padlocks since 2008 to secure nine of its wind farm properties in four states.

Stewart Whitman, the Performance Manager for bp’s Flat Ridge 1 Wind Farm in Isabel, Kansas, said there were several challenges to finding the right padlock before choosing ABLOY as their critical infrastructure source.

“We were looking for a lock that was extremely secure while performing well under a variety of demanding conditions,” said Whitman. “I would say ABLOY has lived up to those expectations.”

The shift to cleaner and renewable sources of energy for the future continues to strengthen and expand at an impressive rate. The growth of wind farms has increased dramatically in the past decade, with many properties erecting dozens or hundreds of large and powerful wind turbines over a sprawling amount of remote acreage. As a potential target threat to thieves, access to the turbine and the sensitive information it records need to be protected.

With continuously updated and stricter NERC regulations to deal with, having the right padlock like the patented PL340 is a necessity.

Durable Padlocks

ABLOY PL340 padlocks are sought after for being highly durable and tough as nails. Designed and manufactured to meet ANSI standards, they are constructed from case hardened boron steel and tested under extreme conditions. The majority of the padlocks at the bp Alternative Energy wind farms have shackle lengths of either one or two inches.

“It’s difficult to find a quality, very secure padlock that are keyed alike, in the numbers we require,” explained Whitman, a 15-year wind industry veteran who has worked for bp Alternative Energy for the last 10 years. “But not all of the padlocks we have are keyed alike.”

At Whitman’s Flat Ridge 1 farm about 80 miles west of Wichita, he has stationed 20 locks on the turbines and two dozen on its j-boxes. The junction boxes are collection system cabinets where the power cables are joined to the turbine.

“In addition to the ABLOY locks on the turbines and j-boxes,” said Whitman, “we have them on the MET (Meteorlogical Evaluation Towers) access gates and storage connexes. These locks offer ex-ceptional security due to their unique key design. ABLOY now offers a new cyber actuated lock that we are considering buying.”

Whitman’s team and those at the Flat Ridge Wind Farm in Zenda – about 10 miles east – as well as others in Colorado, Indiana, and Pennsylvania, exercise diligence with a regular maintenance schedule that includes physically checking the padlocks. ABLOY’s padlocks have a well-earned reputation for reliable performance, and Whitman understands why.

“In the five years I’ve managed this farm, we’ve only replaced one lock due to a malfunction,” he said. “Some of the locks may go over a year without being opened. Others such as the turbine door locks are opened a minimum of every three months.”

He does so for a number of reasons. In addition to most wind farms being located in remote areas, there is the range of weather conditions they are subjected to. The bp Alternative Energy properties experience the entire gamut, from the snow and sub-freezing conditions near the mountains to the hot and dry conditions across the Kansas plains and in Indiana, where more than one-third of the locks are in use.

“We’ve had very little trouble with the ABLOY locks because of environmental conditions,” summed up Whitman. “My particular site and many of our others operate in farm country so we experience a lot of dust, dirt, snow and ice. The locks have always performed well under all circumstances.”

Visit www.abloyusa.com for more information.

Comments

To comment on this post, please log in to your account or set up an account now.